Have you ever found that the ice cream is well chilled, but the meat in the deli tray is suspiciously hot? You are probably finding out what happened (and you may be left with a mess to clean, which can be challenging). If the fridge is not cooling but the freezer is, the mechanism in the fridge may not be working as designed. Therefore, you need to seek out help from a professional fridge technician to fix the issues.
Evaporator Fan
Every fridge has a coil called an evaporator, which cools the inside of the fridge. A small fan and motor are attached to the side of the evaporator to help pull air over the coil and circulate it through the fridge and freezer. If this fan fails, the fridge is likely to be stuck in a hot fridge.
Damper Controls
A damper control is a door that opens and closes automatically or manually to let more or less cold air into the refrigerator. If this door gets stuck or broken, it will not let in enough cold air to maintain the correct temperature.
Condenser Coil
According to the experts offering refrigerator repairs, the condenser coil constantly expels heat from the fridge to maintain the right temperature. If they become clogged with dust, debris or pet hair, it becomes challenging for them to expel heat. As a result, the fridge gets hotter.
Temperature Control Board
The control of the fridge is like the “brain.” It monitors the temperature sensors, drives the compressor fan and regulates the defrost cycle. A faulty board will misread the temperature sensor and prevent the fridge from cooling properly.
What Should You Do if the Fridge Doesn’t Start?
The list above covers the most common reasons why a fridge may not work, but the top or bottom freezer does. From here, go to your user manual to locate each component. Then, refer to the relevant recommendations to identify which mechanism is faulty and what to do about it.
Pro. Note: Whenever you are fixing anything in your fridge, always unplug the power supply before troubleshooting the refrigerator.
Check the Evaporator Fan
To determine if the evaporator fan motor is faulty, start by locating this component. Most evaporator fans are located at the rear of the freezer. Once located, try turning the fan blades by hand. If the blades do not spin freely or are unusually noisy, it is recommended that they be replaced. You can also test the motor windings for continuity using a multimeter. If there is no continuity, they may need to be replaced.
Check the Defrost System
A professional fridge technician near you recommends that if you check the evaporator coil and find it frozen, you will want to test each component of the defrost system (defrost heater, thermostat and timer). To temporarily start the fridge, remove the back panel of the freezer and remove all accumulated ice. If the fridge breaks down again a few days after cooling down, you may need to replace parts of the defrosting system.
Get Inspected by a Technician
The temperature control board is unlikely to cause the fridge to stop working, so it is vital to check the most frequently failing components first. If the numbers from 1 to 5 are working correctly, a specialist may be required to diagnose the issue and install a new board or parts in the fridge.
Last but not least, it is always best to look for a professional who can save you time, energy and money. If you perform DIY work in your fridge, you may face a lot of issues with it as you are not experienced and skilled. So, it is best to contact a professional like Fast Fridge Repairs, who can help you appropriately. To contact us, you can call 0405972558, or if you have any queries, you can mail us at info@fastfridgerepairs.com.au.